smartctl version 5.33 [i686-pc-linux-gnu] Copyright (C) 2002-4 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Device Model: Maxtor 6Y160P0 Serial Number: Y45M2Z1E Firmware Version: YAR41BW0 User Capacity: 163,928,604,672 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 7 ATA Standard is: ATA/ATAPI-7 T13 1532D revision 0 Local Time is: Thu Nov 11 13:43:55 2004 EET SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x80) Offline data collection activity was never started. Auto Offline Data Collection: Enabled. Self-test execution status: ( 118) The previous self-test completed having the read element of the test failed. Total time to complete Offline data collection: ( 302) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 72) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 3 Spin_Up_Time 0x0027 252 252 063 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 253 253 000 Old_age Always - 0 5 Reallocated_Sector_Ct 0x0033 232 232 063 Pre-fail Always - 219 6 Read_Channel_Margin 0x0001 253 253 100 Pre-fail Offline - 0 7 Seek_Error_Rate 0x000a 253 252 000 Old_age Always - 0 8 Seek_Time_Performance 0x0027 252 252 187 Pre-fail Always - 38106 9 Power_On_Minutes 0x0032 253 253 000 Old_age Always - 283h+11m 10 Spin_Retry_Count 0x002b 252 252 157 Pre-fail Always - 0 11 Calibration_Retry_Count 0x002b 252 252 223 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 253 253 000 Old_age Always - 10 192 Power-Off_Retract_Count 0x0032 253 253 000 Old_age Always - 0 193 Load_Cycle_Count 0x0032 253 253 000 Old_age Always - 0 194 Temperature_Celsius 0x0032 253 253 000 Old_age Always - 42 195 Hardware_ECC_Recovered 0x000a 253 252 000 Old_age Always - 4302 196 Reallocated_Event_Count 0x0008 253 253 000 Old_age Offline - 0 197 Current_Pending_Sector 0x0008 232 232 000 Old_age Offline - 218 198 Offline_Uncorrectable 0x0008 252 252 000 Old_age Offline - 1 199 UDMA_CRC_Error_Count 0x0008 253 253 000 Old_age Offline - 0 200 Multi_Zone_Error_Rate 0x000a 253 252 000 Old_age Always - 0 201 Soft_Read_Error_Rate 0x000a 253 252 000 Old_age Always - 13 202 TA_Increase_Count 0x000a 249 248 000 Old_age Always - 6 203 Run_Out_Cancel 0x000b 253 252 180 Pre-fail Always - 127 204 Shock_Count_Write_Opern 0x000a 253 252 000 Old_age Always - 0 205 Shock_Rate_Write_Opern 0x000a 253 252 000 Old_age Always - 0 207 Spin_High_Current 0x002a 252 252 000 Old_age Always - 0 208 Spin_Buzz 0x002a 252 252 000 Old_age Always - 0 209 Offline_Seek_Performnce 0x0024 253 253 000 Old_age Offline - 0 99 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0 100 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0 101 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0 SMART Error Log Version: 1 Warning: ATA error count 656 inconsistent with error log pointer 5 ATA Error Count: 656 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 656 occurred at disk power-on lifetime: 265 hours (11 days + 1 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 59 20 80 9e 04 e0 Error: UNC at LBA = 0x00049e80 = 302720 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 24 00 20 80 9e 04 e0 08 12d+20:55:25.968 READ SECTOR(S) EXT 24 00 20 80 9e 04 e0 08 12d+20:55:24.032 READ SECTOR(S) EXT 10 00 ff 00 00 00 e0 08 12d+20:55:24.000 RECALIBRATE [OBS-4] 24 00 20 80 9e 04 e0 08 12d+20:55:22.320 READ SECTOR(S) EXT 24 00 20 80 9e 04 e0 08 12d+20:55:20.608 READ SECTOR(S) EXT Error 655 occurred at disk power-on lifetime: 265 hours (11 days + 1 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 01 59 20 80 9e 04 e0 Error: AMNF at LBA = 0x00049e80 = 302720 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 24 00 20 80 9e 04 e0 08 12d+20:55:24.032 READ SECTOR(S) EXT 10 00 ff 00 00 00 e0 08 12d+20:55:24.000 RECALIBRATE [OBS-4] 24 00 20 80 9e 04 e0 08 12d+20:55:22.320 READ SECTOR(S) EXT 24 00 20 80 9e 04 e0 08 12d+20:55:20.608 READ SECTOR(S) EXT 24 00 20 80 9e 04 e0 0e 12d+20:55:20.576 READ SECTOR(S) EXT Error 654 occurred at disk power-on lifetime: 265 hours (11 days + 1 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 01 59 20 80 9e 04 e0 Error: AMNF at LBA = 0x00049e80 = 302720 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 24 00 20 80 9e 04 e0 08 12d+20:55:22.320 READ SECTOR(S) EXT 24 00 20 80 9e 04 e0 08 12d+20:55:20.608 READ SECTOR(S) EXT 24 00 20 80 9e 04 e0 0e 12d+20:55:20.576 READ SECTOR(S) EXT 24 00 20 80 9e 04 e0 08 12d+20:55:18.816 READ SECTOR(S) EXT 24 00 20 80 9e 04 e0 08 12d+20:54:11.584 READ SECTOR(S) EXT Error 653 occurred at disk power-on lifetime: 265 hours (11 days + 1 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 01 59 20 80 9e 04 e0 Error: AMNF at LBA = 0x00049e80 = 302720 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 24 00 20 80 9e 04 e0 08 12d+20:55:20.608 READ SECTOR(S) EXT 24 00 20 80 9e 04 e0 0e 12d+20:55:20.576 READ SECTOR(S) EXT 24 00 20 80 9e 04 e0 08 12d+20:55:18.816 READ SECTOR(S) EXT 24 00 20 80 9e 04 e0 08 12d+20:54:11.584 READ SECTOR(S) EXT 10 00 ff 00 00 00 e0 08 12d+20:54:11.552 RECALIBRATE [OBS-4] Error 652 occurred at disk power-on lifetime: 265 hours (11 days + 1 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 01 59 20 80 9e 04 e0 Error: AMNF at LBA = 0x00049e80 = 302720 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 24 00 20 80 9e 04 e0 08 12d+20:55:18.816 READ SECTOR(S) EXT 24 00 20 80 9e 04 e0 08 12d+20:54:11.584 READ SECTOR(S) EXT 10 00 ff 00 00 00 e0 08 12d+20:54:11.552 RECALIBRATE [OBS-4] 24 00 20 80 9e 04 e0 08 12d+20:54:09.872 READ SECTOR(S) EXT 24 00 20 80 9e 04 e0 08 12d+20:54:07.904 READ SECTOR(S) EXT SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed: read failure 60% 265 319055636 SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.